AWWA Store
Back to AWWA Standards Print-Full Set

AWWA Standards Print-Full Set

Publisher: American Water Works Association
AWWA catalog no: 49000
Media Type: RING-BOUND

AWWA Standards full print set contains all current AWWA Standards. A one-year subscription for all new and revised standards is included with purchase. For a listing of individual standards, click on categories at left.

Individual standards are available in both print and downloadable PDF formats.

Includes
  • AWWA A100-15 Water Wells
  • AWWA B100-16 Granular Filter Material
  • AWWA B101-16 Precoat Filter Media
  • AWWA B102-15 Manganese Greensand for Filters
  • AWWA B110-09 Membrane Systems
  • AWWA B112-15 Microfiltration and Ultrafiltration Membrane Systems
  • AWWA B114-16 Reverse Osmosis and Nanofiltration Systems for Water Treatment
  • AWWA B116-15 Electrodialysis and Ion-Exchange Membrane Systems
  • AWWA B130-18 Membrane Bioreactor Systems
  • AWWA B200-17 Sodium Chloride
  • AWWA B201-13 Soda Ash
  • AWWA B202-13 Quicklime and Hydrated Lime
  • AWWA B300-18 Hypochlorites
  • AWWA B301-18 Liquid Chlorine
  • AWWA B302-16 Ammonium Sulfate
  • AWWA B303-18 Sodium Chlorite
  • AWWA B304-13 Liquid Oxygen for Ozone Generation for Water, Wastewater, and Reclaimed Water Systems
  • AWWA B305-15 Anhydrous Ammonia
  • AWWA B306-15 Aqua Ammonia (Liquid Ammonium Hydroxide)
  • AWWA B402-18 Ferrous Sulfate
  • AWWA B403-16 Aluminum Sulfate—Liquid, Ground, or Lump
  • AWWA B404-14 Liquid Sodium Silicate
  • AWWA B405-16 Sodium Aluminate
  • AWWA B406-14 Ferric Sulfate
  • AWWA B407-18 Liquid Ferric Chloride
  • AWWA B408-18 Liquid Polyaluminum Chloride
  • AWWA B451-16 Poly (Diallyldimethylammonium Chloride)
  • AWWA B452-14 EPI-DMA Polyamines
  • AWWA B453-13 Polyacrylamide
  • AWWA B501-13 Standard for Sodium Hydroxide (Caustic Soda)
  • AWWA B502-17 Standard for Sodium Polyphosphate, Glassy (Sodium Hexametaphosphate)
  • AWWA B503-17 Standard for Sodium Tripolyphosphate
  • AWWA B504-18 Monosodium Phosphate, Anhydrous and Liquid
  • AWWA B505-18 Disodium Phosphate, Anhydrous
  • AWWA B506-18 Zinc Orthophosphate
  • AWWA B510-18 Carbon Dioxide
  • AWWA B511-17 Potassium Hydroxide
  • AWWA B512-15 Sulfur Dioxide
  • AWWA B550-17 Calcium Chloride
  • AWWA B600-16 Powdered Activated Carbon
  • AWWA B601-17 Sodium Metabisulfite
  • AWWA B602-17 Copper Sulfate
  • AWWA B603-16 Permanganates
  • AWWA B604-18 Granular Activated Carbon
  • AWWA B605-18 Reactivation of Granular Activated Carbon
  • AWWA B701-18 Sodium Fluoride
  • AWWA B702-18 Sodium Fluorosilicate
  • AWWA B703-11 Fluorosilicic Acid
  • AWWA C104/A21.4-16 Cement-Mortar Lining for Ductile Iron Pipe and Fittings
  • AWWA C105/A21.5-18 Polyethylene Encasement for Ductile-Iron Pipe Systems
  • AWWA C110-12 Ductile-Iron and Gray-Iron Fittings
  • AWWA C111/A21.11-17 Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
  • AWWA C115-11 Flanged Ductile-Iron Pipe With Ductile-Iron or Gray-Iron Threaded Flanges
  • AWWA C116-15 Protective Fusion-Bonded Coatings for the Interior and Exterior Surfaces of Ductile-Iron and Gray-Iron Fittings
  • AWWA C150-14 Thickness Design of Ductile-Iron Pipe
  • AWWA C151/A21.51-17 Ductile-Iron Pipe, Centrifugally Cast
  • AWWA C153-11 Ductile-Iron Compact Fittings
  • AWWA C200-17 Steel Water Pipe, 6 In. (150 mm) and Larger
  • AWWA C203-15 Coal-Tar Protective Coatings and Linings for Steel Water Pipes
  • AWWA C205-18 Cement–Mortar Protective Lining and Coating for Steel Water Pipe 4 In. (100 mm) and Larger—Shop Applied
  • AWWA C206-17 Field Welding of Steel Water Pipe
  • AWWA C207-18 Steel Pipe Flanges for Waterworks Service—Sizes 4 In. Through 144 In. (100 mm Through 3,600 mm)
  • AWWA C208-17 Dimensions for Fabricated Steel Water Pipe Fittings
  • AWWA C209-13 Cold-Applied Tape Coatings for Steel Water Pipe and Fittings
  • AWWA C210-15 Liquid-Epoxy Coatings and Linings for Steel Water Pipe and Fittings
  • AWWA C213-15 Fusion-Bonded Epoxy Coatings and Linings for Steel Water Pipe and Fittings
  • AWWA C214-14 Tape Coatings for Steel Water Pipe
  • AWWA C215-16 Extruded Polyolefin Coatings for Steel Pipe
  • AWWA C216-15 Heat-Shrinkable Cross-Linked Polyolefin Coatings for Steel Water Pipe and Fittings
  • AWWA C217-16 Microcrystalline Wax and Petrolatum Tape Coating Systems for Steel Water Pipe and Fittings
  • AWWA C218-16 Liquid Coatings for Aboveground Steel Water Pipe and Fittings
  • AWWA C219-17 Bolted Sleeve-Type Couplings for Plain-End Pipe
  • AWWA C220-17 Standard for Stainless-Steel Pipe, 1//2 In. (13 mm) and Larger
  • AWWA C221-18 Fabricated Steel Mechanical Slip-Type
  • AWWA C222-18 Polyurethane Coatings and Linings for Steel Water Pipe and Fittings (PDF)
  • AWWA C223-13 Fabricated Steel and Stainless Steel Tapping Sleeves
  • AWWA C224-17 Nylon-11-Based Polyamide Coatings and Linings for Steel Water Pipe and Fittings
  • AWWA C225-14 Fused Polyolefin Coatings for Steel Water Pipe
  • AWWA C226-13 Stainless-Steel Fittings for Waterworks Service, Sizes 1/2 In. Through 72 In. (13 mm Through 1,800 mm)
  • AWWA C227-17 Bolted, Split-Sleeve Couplings
  • AWWA C228-14 Stainless-Steel Pipe Flange Joints for Water Service—Sizes 2 In. Through 72 In. (50 mm Through 1,800 mm)
  • AWWA C229-15 Fusion-Bonded Polyethylene Coatings for Steel Water Pipe and Fittings
  • AWWA C230-16 Stainless-Steel Full-Encirclement Repair and Service Connection Clamps for 2 in. Through 12 in. (50 mm Through 300 mm) Pipe
  • AWWA C231-17 Field Welding of Stainless Steel Water Pipe
  • AWWA C300-16 Reinforced Concrete Pressure Pipe, Steel-Cylinder Type
  • AWWA C301-14 Prestressed Concrete Pressure Pipe, Steel-Cylinder Type
  • AWWA C302-16 Reinforced Concrete Pressure Pipe, Noncylinder Type
  • AWWA C303-17 Concrete Pressure Pipe, Bar-Wrapped, Steel-Cylinder Type
  • AWWA C304-14 Design of Prestressed Concrete Cylinder Pipe
  • AWWA C305-18 CFRP Renewal and Strengthening of Prestressed Concrete Cylinder Pipe (PCCP)
  • AWWA C500-09 Metal-Seated Gate Valves for Water Supply Service
  • AWWA C502-14 Dry-Barrel Fire Hydrants
  • AWWA C503-14 Wet-Barrel Fire Hydrants
  • AWWA C504-15 Rubber-Seated Butterfly Valves
  • AWWA C507-18 Ball Valves, 6 In. Through 60 In. (150 mm Through 1,500 mm)
  • AWWA C508-17 Swing-Check Valves for Waterworks Service, 2-In. Through 48-In. (50-mm Through 1200-mm) NPS
  • AWWA C509-15 Resilient-Seated Gate Valves for Water Supply Service
  • AWWA C510-17 Double Check Valve Backflow Prevention Assembly
  • AWWA C511-17 Reduced-Pressure Principle Backflow Prevention Assembly
  • AWWA C512-15 Air Release, Air/Vacuum, and Combination Air Valves for Water and Wastewater Service
  • AWWA C514-15 Air Valve and Vent Inflow Preventer Assemblies for Potable Water Distribution System and Storage Facilities
  • AWWA C515-15 Reduced-Wall, Resilient-Seated Gate Valves for Water Supply Service
  • AWWA C516-14 Large-Diameter Rubber-Seated Butterfly Valves, Sizes 78 In. (2,000 mm) and Larger
  • AWWA C517-16 Resilient-Seated Cast-Iron Eccentric Plug Valves
  • AWWA C518-13 Dual-Disc Swing-Check Valves for Waterworks Service
  • AWWA C519-18 High Performance Waterworks Butterfly Valves – 3 In. (75 mm) through 60 In. (1,500 mm)
  • AWWA C520-14 Knife Gate Valves, Sizes 2 In. (50 mm) Through 96 In. (2,400 mm)
  • AWWA C530-17 Pilot-Operated Control Valves
  • AWWA C541-16 Hydraulic and Pneumatic Cylinder and Vane-Type Actuators for Valves and Slide Gates
  • AWWA C542-16 Electric Motor Actuators for Valves and Slide Gates
  • AWWA C550-17 Protective Interior Coatings for Valves and Hydrants
  • AWWA C655-18 Field Dechlorination (PDF)
  • AWWA C560-14 Cast-Iron Slide Gates
  • AWWA C561-14 Fabricated Stainless-Steel Slide Gates
  • AWWA C562-14 Fabricated Aluminum Slide Gates
  • AWWA C563-14 Fabricated Composite Slide Gates
  • AWWA C600-17 Installation of Ductile-Iron Mains and Their Appurtenances
  • AWWA C602-17 Cement-Mortar Lining of Water Pipelines in Place - 4 In. (100 mm) and Larger
  • AWWA C604-17 Installation of Buried Steel Water Pipe—4 In. (100 mm) and Larger
  • AWWA C605-13 Underground Installation of Polyvinyl Chloride (PVC) and Molecularly Oriented Polyvinyl Chloride (PVCO) Pressure Pipe and Fittings
  • AWWA C606-15 Grooved and Shouldered Joints
  • AWWA C620-07 (17) Spray-Applied In-Place Epoxy Lining of Water Pipelines, 3 In. and Larger
  • AWWA C621-18 Internal Pipe Joint Seal Assemblies for Water Service
  • AWWA C651-14 Disinfecting Water Mains
  • AWWA C652-11 Disinfection of Water Storage Facilities
  • AWWA C653-13 Disinfection of Water Treatment Plants
  • AWWA C654-13 Disinfection of Wells
  • AWWA C670-15 Online Chlorine Analyzer Operation and Maintenance
  • AWWA C671-16 Online Turbidimeter Operation and Maintenance
  • AWWA C700-15 Cold-Water Meters—Displacement Type, Metal Alloy Main Case
  • AWWA C701-15 Cold-Water Meters–Turbine Type, for Customer Service
  • AWWA C702-15 Cold Water Meters—Compound Type
  • AWWA C703-15 Cold-Water Meters—Fire-Service Type
  • AWWA C704-15 Propeller-Type Meters for Waterworks Applications
  • AWWA C707-10(R16) Encoder-Type Remote-Registration Systems for Cold-Water Meters
  • AWWA C708-15 Cold-Water Meters—Multijet Type
  • AWWA C710-15 Cold-Water Meters—Displacement Type, Plastic Main Case
  • AWWA C712-15 Cold-Water Meters, Singlejet Type
  • AWWA C713-15 Cold-Water Meters—Fluidic-Oscillator Type
  • AWWA C714-13 Cold-Water Meters for Residential Fire Sprinkler Systems in One- and Two-Family Dwellings and Manufactured Homes
  • AWWA C715-18 Standard for Cold Water Meters—Electromagnetic and Ultrasonic Type for Revenue Applications
  • AWWA C750-16 Transit-Time Flowmeters in Full Closed Conduits
  • AWWA C751-16 Magnetic Inductive Flowmeters
  • AWWA C800-14 Underground Service Line Valves & Fittings
  • AWWA C810-17 Replacement and Flushing of Lead Service Lines
  • AWWA C900-16 Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings, 4 In. Through 60 In. (100 mm Through 1,500 mm)
  • AWWA C901-17 Polyethylene (PE) Pressure Pipe and Tubing, 3/4 In. (19 mm) Through 3 In. (76 mm), for Water Service
  • AWWA C903-16 Polyethylene–Aluminum–Polyethylene (PE-AL-PE) Composite Pressure Pipe, 12 mm (½ In.) Through 51 mm (2 In.), for Water Service
  • AWWA C904-16 Cross-linked Polyethylene (PEX) Pressure Tubing, ½ In. (13 mm) Through 3 In. (76 mm) for Water Service
  • AWWA C906-15 Polyethylene (PE) Pressure Pipe and Fittings, 4 In. Through 65 In. (100 mm Through 1,650 mm), for Waterworks
  • AWWA C907-17 Standard for Injection-Molded Polyvinyl Chloride (PVC) Pressure Fittings, 4 In. Through 12 In. (100 mm Through 300 mm), for Water, Wastewater, and Reclaimed Water Service
  • AWWA C909-16 Molecularly Oriented Polyvinyl Chloride (PVCO) Pressure Pipe, 4 In. (100 mm) and Larger
  • AWWA C950-13 Fiberglass Pressure Pipe
  • AWWA D100-11 Welded Carbon Steel Tanks for Water Storage
  • AWWA D102-17 Coating Steel Water-Storage Tanks
  • AWWA D103-09 Factory-Coated Bolted Carbon Steel Tanks for Water Storage
  • AWWA D104-17 Automatically Controlled, Impressed-Current Cathodic Protection for the Interior Submerged Surfaces of Steel Water Storage Tanks
  • AWWA D106-16 Sacrificial Anode Cathodic Protection Systems for the Interior Submerged Surfaces of Steel Water Storage Tanks
  • AWWA D107-16 Composite Elevated Tanks for Water Storage
  • AWWA D108-10 Aluminum Dome Roofs for Water Storage Facilities
  • AWWA D110-13 (R18) Wire- and Strand-Wound, Circular, Prestressed Concrete Water Tanks
  • AWWA D115-17 Tendon-Prestressed Concrete Tanks
  • AWWA D120-09 Thermosetting Fiberglass-Reinforced Plastic Tanks
  • AWWA D121-12 Bolted Aboveground Thermosetting Fiberglass-Reinforced Plastic Panel-Type Tanks for Water Storage
  • AWWA D130-11 Geomembrane Materials for Potable Water Applications
  • AWWA E102-17 Submersible Vertical Turbine Pumps
  • AWWA E103-15 Horizontal and Vertical Line-Shaft Pumps
  • AWWA E200-18 Progressive Cavity Chemical Metering Pumps
  • AWWA F101-13 Contact-Molded, Fiberglass-Reinforced Plastic Wash-Water Troughs and Launders
  • AWWA F102-13 Matched-Die Molded, Fiberglass-Reinforced Plastic Weir Plates, Scum Baffles, and Mounting Brackets
  • AWWA F110-16 Ultraviolet Disinfection Systems for Drinking Water
  • AWWA F120-18 Ozone Systems for Water
  • AWWA G100-17 Water Treatment Plant Operation and Management
  • AWWA G200-15 Distribution Systems Operation and Management
  • AWWA G300-14 Source Water Protection
  • AWWA G400-18 Utility Management System
  • AWWA G410-09 Business Practices for Operation and Management
  • AWWA G420-17 Communication and Customer Relations
  • AWWA G430-14 Security Practices for Operation and Management
  • AWWA G440-17 Emergency Preparedness Practices
  • AWWA G480-13 Water Conservation Program Operation and Management
  • AWWA G481-14, Reclaimed Water Program Operation and Management
  • AWWA G485-18 Direct Potable Reuse Program Operation and Management
  • AWWA G510-13 Standard for Wastewater Treatment Plant Operations and Management
  • AWWA J100-10 (R13) Risk and Resilience Management of Water and Wastewater Systems
  • Standards Binder
Item Details:

AWWA Standards Set contains all current AWWA standards (more than 172), plus a one-year subscription that brings you all revised and new standards published during the following 12 months (20-25 standards). You have the option to renew your subscription each year.

Annual...

Back to AWWA Standards Print-Full Set
View More
  • List Price: $5,990.00 USD
  • Member Price: $3,774.00 USD

 
Want to save more?
to see if you qualify for a lower rate.
Members save: $2,216.00 USD or more
You might also like:
People who bought this also bought: